Cleanse Anti-Backflow Silicone Medical Grade Anal Douche 180 Ml

Design and Construction

This manual irrigation device consists of a 180-milliliter medical-grade silicone bulb paired with a tapered silicone nozzle. The bulb compresses under manual hand pressure to deliver controlled fluid expulsion through the nozzle tip. Medical-grade silicone construction ensures non-porous contact surfaces that resist bacterial colonization and maintain structural integrity through repeated compression cycles. The material remains flexible across temperature ranges suitable for body-safe cleansing while providing sufficient wall thickness to withstand routine handling force.

The tapered nozzle measures approximately 4 inches in insertable length with a graduated diameter that begins narrow at the tip and widens toward the base, facilitating gradual insertion and secure positioning during use. The nozzle attaches to the bulb through a threaded or friction-fit connection that remains watertight under compression.

Anti-Backflow Valve System

A stainless steel one-way valve positioned at the bulb's intake port mechanically controls fluid direction. This valve allows water to enter the bulb when suction is applied by releasing hand pressure after submersion or placement under a faucet stream. Once filled, the valve closes under positive pressure from bulb compression, directing all fluid forward through the nozzle while preventing reverse flow back toward the water source. This sealed system eliminates contamination of tap fixtures or filling containers and maintains consistent delivery pressure throughout the compression stroke.

The valve housing integrates flush with the silicone body, eliminating external protrusions that could interfere with grip or storage. Stainless steel construction resists corrosion from repeated water exposure and cleaning agent contact.

Filling and Operation

To fill, submerge the intake port in clean water or position it under running tap water while the bulb is compressed. Release hand pressure to create negative pressure that draws water through the open valve until the bulb reaches full 180-milliliter capacity. Remove from water source—the valve automatically closes to seal contents inside.

Insert the lubricated nozzle to the desired depth, then apply steady compression to the bulb to expel fluid at a rate controlled by grip pressure. The 180-milliliter volume allows single-fill cleansing for light preparation or multiple refill cycles for more thorough irrigation depending on individual requirements.

The manual compression design eliminates batteries, electrical components, and pump mechanisms, relying entirely on applied hand force for operation. This mechanical simplicity reduces failure points and allows unlimited use duration without charging intervals.

Maintenance and Hygiene

The fully silicone construction with minimal component interfaces simplifies post-use cleaning. After each session, separate the nozzle from the bulb if the connection allows detachment. Rinse all surfaces thoroughly with warm water, then wash with mild unscented soap, paying particular attention to the interior bulb chamber and nozzle bore. Flush the nozzle channel by repeatedly compressing the empty bulb after reattachment to expel residual water.

The medical-grade silicone tolerates brief exposure to boiling water for periodic heat sanitization, though routine soap washing provides adequate hygiene for personal single-user application. Avoid harsh chemical disinfectants, alcohol-based cleaners, or abrasive scrubbing tools that may degrade silicone surfaces or compromise material integrity over time.

Store the device fully dry in a clean location away from direct sunlight. Ensure the valve mechanism remains unobstructed by lint or debris between uses.

Specifications

• Capacity: 180 milliliters
• Material: Medical-grade silicone (bulb and nozzle), stainless steel (valve)
• Nozzle Length: Approximately 4 inches insertable
• Nozzle Shape: Tapered with graduated diameter
• Valve Type: One-way anti-backflow stainless steel
• Operation: Manual compression
• Power Source: None required
• UPC: 781005710186

User Considerations

Use only water-based lubricant on the silicone nozzle to prevent material degradation. Silicone-based lubricants will bond with the device surface and compromise structural integrity.

Begin with lukewarm water temperatures near body temperature (98-100°F) to avoid thermal shock to internal tissues. Test water temperature on the inside of your wrist before filling. Never use hot water, which can cause burns to sensitive rectal mucosa.

Insert the nozzle slowly with adequate lubrication, stopping if resistance or discomfort occurs. Apply gentle, steady compression rather than rapid forceful squeezing to maintain comfortable internal pressure during fluid delivery.

For individuals new to anal irrigation, start with partial bulb fills (60-90 milliliters) to assess tolerance before progressing to full 180-milliliter capacity. Allow sufficient time between irrigation sessions for the rectal lining to recover—daily use is generally considered excessive except under specific medical guidance.

Discontinue use if irritation, bleeding, cramping, or adverse symptoms develop, and consult a healthcare provider if concerns persist. This device is intended for external personal hygienic preparation and is not a substitute for medical enema equipment or professional bowel management protocols.